Windows 10 clean install keep partitions free

Looking for:

Looking for:

Windows 10 clean install keep partitions free

Click here to Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Mar 16,  · Step 4. Now, you can find a piece of unallocated space is created. Right-click on the C drive and select “Merge Partitions”. Step 5. Tick off the unallocated space and hit “OK”. Step 6. After returning to the main interface, click on “Apply” on the upper left to start the system drive extension. Mar 03,  · Hi everyone, excuse my ignorance as I’m not exactly tech savvy. I’m wanting to do a clean install of Windows My system was upgraded from Windows . Mar 02,  · Check Windows 10 activation. Open Settings. Click on Update & Security. Click on Activation. Under the “Windows” section, confirm the activation. If the computer has been properly activated, you’ll see one of these messages: Windows is activated with a digital license: The installation has been.
 
 

 

Windows 10 clean install keep partitions free. How to do a clean installation of Windows 10

 

There’s no need to use the key during that install because you would have already validated Windows 10 during the “upgrade” process. Two, I think the word converted should not be used. Maybe “aligned” or “associated” is a better way of looking at it. MS will not invalidate your use of the key with the pervious version of Windows you upgrade from. So if I ever wanted to go back to either Windows 7 or 8 which ever I have , I would be using the original key.

Your Windows 8. But you can’t downgrade from a clean install. You have to perform a clean Windows 8. You can only downgrade from a upgrade process although you have 30 days to do so. Warning downgrading back to 8. Some can get fixed by reinstalling them but some cant. They just force close after the splash screen. I had to do a PC refresh. Losing all my programs and updates. Spent 8 hours last night downloading 1. No such thing can be done. One will have to perform another clean install and use the original product key.

Posted via the Windows Central App for Android. Nope, if you upgrade to Windows 10 you can go back to 8. Not sure about Win7. I had the option. I tried using the key for a msi computer with Windows 7. The clean install of windows 10 did not accept the mass oem key from msi.

So doing a clean install what would one use for the key to activate it. This article really fails to answer the most important question people have already asked me. Note: sticker was completely worn out and so we pulled the product key using jellybean.

W10 didnt accept the key. Updating via update failed numerous times. I see you never updated Windows 7 to Windows 10, you need to that first for key to get coverted to windows 10 before doing a clean install.

Did you upgrade first before doing the clean install? Tried upgrading first but keeps reseting to a blank screen then it say restoring to previous version. Regardless of your upgrade issues. The upgrade has to be performed first. Then if you want, you can do a clean install. You’ll have to try and work out the upgrade issues with MS. The Microsoft forums hopefully can have your answers.

Daniel Rubino commented on a comment about 20 minutes ago and now, question like yours which does make sense seems like being ignored. Very disappointing. And I hope that when they do reply, they wouldn’t sound rude e. Busy, check Windows 10 forum, etc.

It’s not about being rude. Let me explain you, this person didn’t upgrade, this person just clean installed Windows 10 and thought by putting windows 7 key it would work. Windows 10 will automatically activate you.

Again, I am sure Daniel Rubino is a nice guy, but these kind of questions should be asked on a forum. AND if you are going to ask, you should just go back and read “what did I do wrong?? You first upgrade! Why wouldn’t Daniel Rubino ignore this? I did try updating it. It was clearly the easiest path for me but unfortunately the upgrade kept restoring. Even when a fresh format for windows 7.

Im just asking what a resolution would be. For your info dude I have not installed win10 and am still running win7. It’s not really a rudeness or being busy thing. The writers don’t have all the answers, they are writers with technical knowledge, not necessarily technical experts.

If you want to ensure that your question gets maximum exposure, it should be asked in the forums. Activate over the phone and then connect to the internet. Then run the Windows 10 update tool. I had multiple OS multi-boot on my laptop. Different versions.. How do I get my OS upgraded to get the new Windows 10 key?? No difference. Very frustrating You can also just do a reset for those that don’t want create the media or deal with partitioning. There is even the option to keep your personal files that get put into a folder called Windows.

I’ve found it an easy and hassle free way to do it. I’d recommend it to anyone who did several preview upgrades as it cleared out all my issues that were inherited from prior builds. It’s just like hard resetting the phone. This gave me a bluescreen on my Surface Pro 3. You can upgrade your windows 8. This ended up causing a blue screen just a day after upgrading. Back on 8. Hi, quick question here, I’m still upgrading mine to Windows 10 using Download Tool, if sometimes in the future I want to do clean install, should I re-download the ISO file?

Also, if I’m upgrading with this way, should I re-enter the product key? I haven’t been able to backup that yet.. Any response will be appreciated, thanks! Upgrading using download tool doesnt require a product key. If you want to perform a clean installation in future, you would need to use download tool for creating bootable DVD or USB. You don’t need a product key to clean install. Your key is linked to your hardware.

If you had an activated Windows 10, Windows will activate automatically after clean installing. What’s the difference between fresh install of windows 10 and resetting the already installed windows 10? I would like to know this as well. After I upgraded to windows 10 I did a reset of the OS through settings.

Reset might not work for some issues. I think reset and delete all files without wiping the disk is the best thing. I tried doing the “reset’ from within W10 twice.. Got a BSOD both times I used the dvd I made from the. I was prompted twice to enter a key, skipped both times. Checked that W10 was activated when it was all done It was in fact.

I upgraded from Windows 7 to 10 through Windows update. And this article mentions, the 7 product key will be changed to 10 product key. So can I still use that product key to activate 7 or will it only work with 10 now? Your key should work on 7 because it’s a win7 key. But Windows 10 doesn’t need a key, your key is your hardware, that’s what Windows 10 searches, if it matches it will say “oh this hardware was activated before, so it will be activated” that’s why you can just put your windows 10 dvd and clean install without upgrading after you did a first upgrade of course so it would activate your hardware from 7 to If your W10 is running slow I suggest doing a clean W10 install.

Windows upgrades impact your system performance. Tried resetting my pc. While it is better now, still not upto 7’s smoothness. A full clean install is not viable as I have a lot of data to transfer that too without an external hard drive. Well it seems it’s easier just to Reset and delete all files no? Exactly my thought. Just upgrade to win10 and do a reset without keeping files and settings.

That’s no different than doing a clean install right? This technique doesn’t work. The main issue is that if you use your windows 8. If you skip the product key, you’ll have an un-activated version of windows installed.

After talking to Microsoft support, they basically want you to buy windows 10 if you truly want to do a clean installl. Otherwise it’s an upgrade every time.

My suggestion is to do a “fresh” install don’t save any previous files and apps. This shoves your old drive into the windows. Then you can run disc cleanup and remove the windows. Then make an image of your drive for future recovery using your favorite imaging tool. I’ve not found any other way that works – and i’ve spent well over 3 days now testing different methods.

Also confirming what everyone else found – the 2 computers i have upgraded to 10 are showing the same generic key and that key will not work for install. It does work. You tried to use your 8. You shouldn’t enter any key at all at any point. If you upgraded to 10 from 7 or 8. During a clean install of Windows 10 later on the same machine, the request for Windows 10 product key must be skipped an option is available. Otherwise your machine can’t be activated. Note: you do NOT need your Windows 8.

Click SKIP when it asks you for a key, and when you sign in on the PC with your Microsoft account same one you were already using , Windows 10 will activate automatically, no key required. Exactly, 8. After a true upgrade, MS stores your licence on their server along with your hardware info.

If you do a clean installation after the upgrade, the whole activation process is automatic. You just have to wait. No keys required. It seems that you don’t need to sign in with your MSA as you said, a local account should work too. As Zapella said, your hardware info is what matters. Well I didn’t perform a clean installation, I just used the media creation tool to upgrade to windows 10, and everything is working like a charm, expect for my display adapter driver, which gave me a low resolution, but I solved it after many trials and finally used windows update to download the latest driver, after I uninstalled the previous one, and I even got two additional updates for windows 10 pro.

You actually don’t need the product key. The clean install will activate it automatically, provided you don’t change the hardware. This makes sense Why would Microsoft expect users to extract their key with an archaic 3 rd party program, just to make use of their much advertised free upgrade for the entire populace?

Should be easy right? And it is. Handy article, however I would say it would’ve been best not to suggest to delete all the partitions off the hard drive lol Just the partition they wish to install on unless they want to clean the hdd “completely”.

That’s the definition of a clean install: deleting absolutely everything, including partitions. Went the manual route for my laptop running Windows 8. Downloaded the ISO – so I can back that up too for later use if needed – loaded onto a USB stick, and used that to do the in-place upgrade.

By the time I made it into Windows 10 settings it was already activated. Then I turned around and did the the clean install – had already fully backed up and was ready, and I had been planning for a clean install anyway – which interestingly went much quicker than the upgrade.

Again, activation was already done by the time I checked on it. Pretty good so far, though the system seems a bit sluggish at times.

Might just be initial shakedown happening, or maybe I need to verify the drivers are current. The mfr has drivers for 7 and 8. ISO will work fine, just make sure you get your license upgraded to a Windows 10 license by first updating through Windows Update, as mentioned in the article. In my case, my desktop and laptop currently run W7 Pro 64 bit. Does the USB get tied to that specific machine which a clean install is performed on?

Thanks J! In total my household has 5 pcs to upgrade, I’m glad I won’t have to buy 5 separate USB drive for each pc. And they have to be the same language if I’m not mistaken. Did it thanks!

If you do everything right, you’ll never need to use any key at all. You don’t need to know your windows 10 key. Might as well buy Windows 10 Home. Clean install; all the way. Once I get it clean install only thru gimagex wonder if the media creation tool is like w8’s where it’ll decrypt the install esd as folder windows payload as I hate being bored with the long drawn out process that the setup app uses.

Hi All, I did a clean install in the same way as its mentioned in the post except taking the key with Magical Jelly Bean, but after the clean install my Windows is not getting activated.

I contacted MS team and got the reply as its due to server slowness issue, but I’m not convinenced becuase its alredy two days my lap in this mode Anyone faced the same issue and got it resolved please post your comments below.

As long as you upgraded to W10 first and it showed as activated. If you tried straight clean install without first doing an upgrade, then the only way I’ve come across for it to work is to rebuild to a clean version of whatever the machine came with don’t waste time on the updates for it either, literally bang on the upgrade from a USB as soon as it’s activated , then upgrade, then clean install at which point it doesn’t need a key as the hwid is registered with MS.

I get the same error code after doing an upgrade of my Windows 10 Developer Preview last night. It was fully updated and activated before I did the upgrade. I upgraded to my own language and it kept only my personal files. The error code means that the key has been blocked.

Same here. Did an upgrade from Win 8. This morning massage pops out that Windows is not activated. It’s must be noted that the requirement to get Windows 10 through Windows Update is only if you want to perform a clean install. If you use the ISO tool to install it, you just skip the cd-key and upgrade the installed OS, then it activates itself from within Windows So it’s safe and fast to just update it with the ISO tool.

Is there any way to recover the Insider activation or something? Exact same issue here. Same with DVDs, is it more than one disc? It does as it has the directories for both. Download it if you need both, and just check the size before dumping to a USB.

Upgrade to win 10 then do a reset Or, you can skip all this, go into the new recovery settings and do a full reset and reinstall Windows 10 automatically Does anyone know if I can upgrade to windows 10 from vista using a clean installation?

You can, but your license won’t be upgraded. You will be running a non-Genuine copy of Windows unless you purchase a Windows 10 license key or sign up for the Windows Insider program.

The licence wouldn’t matter in this case anyway – it’s Vista so doesn’t get a free upgrade. So purchase a new licence key or have MSDN or go the insider path, and do a clean install from there. Doesn’t Windows, since Windows 8, have built in Refresh and Restore options, the latter of which basically formats the hard drive and reinstall Windows automatically?

Correct me if I’m wrong. Definitely a fresh install for me. New components may be on the cards too. While this is closer to a clean install I don’t consider it completely clean.

I don’t lik my OS drives to be quick formatted. I have not seen that anybody mentioned it, but for all students that have access to free Microsoft software via Dreamspark, you can download Win10 iso, put it on the USB or DVD and install clean copy on your system, like usually You will get a new serial key, independent of your previous downloads Win 7 or 8. During clean install, we would definitely format the previous partition then why we need to first upgrade previous version to Windows 10?

It means during clean install you don’t need to give installation key and windows will be activated by itself.

First sorry for my english-I’m from Poland. I done clean installation exactly like you, but I don’t downloaded Windows 10 twice, I only downloaded once and check prepare pendrive. Why did Edge disappear? Taskbar was unresponsive and I fixed that, but Edge disappeared? Losing important documents, pictures, and other data on your device is always worrisome, especially when we need to reinstall Windows on our PCs. Many users may not know this, but it is possible to reinstall Windows 10 without losing any files.

Here’s a simple guide explaining how you can reinstall Windows 10 and keep all files on your PCs. Therefore, if you ever searched for ” re install Windows 10 keep files ” and could not find worthy results, your quest ends here. EaseUS Todo Backup is an award-winning disk imaging backup software that helps initiate ” reinstall Windows 10 keep files ” without losing data.

It is a simple one-click backup software. Over 20,, users enjoy a high level of data security with EaseUS. Their goal is to help you reinstall Windows 10 without losing any files successfully. EaseUS Todo Backup Free lets you backup and restore your important files or entire computer through its streamlined interface. The idea of backup is to protect and save your data. EaseUS free backup software makes it easy to schedule and run backup actively while increasing data output daily.

Scheduling frequent backups can help you safely recover your whole system or deleted data and get everything back from unexpected disasters, crashes, or ransomware.

We suggest you create a backup of essential files on your computer in a manual or automated backup solution provided by EaseUS Todo Backup. You can reinstall Windows 10 without losing any files, and the process is very simple! There are two methods to do this with an easy-to-follow guide on how to go about the process -. Once you reset or reinstall Windows 10 on your PC, the EaseUS Todo Backup software provides an automated backup solution to reinforce and restore all your files without any difficulty.

Windows presents you with three options: “Reset this PC”, “Go back to an earlier version of Windows 10”, and “Advanced startup”. The next step is to choose whether to install Windows via the cloud or locally from your device.

Choose whichever option is suitable. Click “Next” if Windows warns you that you won’t be able to roll back to a prior version of the OS. Click “Reset” when prompted. Windows will then restart and take several minutes to reset itself. Step 3. On the left-hand side, you’ll see a list of local and network files. Selecting the files to be backed up by expanding the directory. Step 4. Follow the instructions on the screen and pick the location where you wish to store the backup. In Backup Options , click Options to encrypt the backup with a password, specify the backup schedule, and choose whether or not to start the backup at a certain event in Backup Scheme.

There are a variety of customizable features available for you to explore, and you may tailor the backup operation to meet your specific requirements.

Step 5. Step 6. EaseUS Todo Backup allows customers to back up data to a third-party cloud drive or the company’s own cloud storage.

Taking everything into consideration, we can say that EaseUS Todo Backup Home can offer you a little extra sense of security with a set of advanced tools. The interface provides quick adaptation, every process guiding you all the way through so you don’t get stuck or further damage your system rather than keeping it safe. EaseUS Todo Backup Free lets you create backups of your important files or your entire computer through its streamlined interface.

Just choose the backup type you’d like to get started, and let the program do the reset. EaseUS includes all the features I expect from backup software like versioning, incremental backups, and scheduling. For more advanced users, EaseUS allows you to install a pre-boot environment onto your hard drive so you can use it to restore files without burning a CD or putting it on an external USB drive. Backup Solutions for Small and Mid-sized Companies of Use 10 minutes to do the 10 hours work without making a single mistake!

Screen Recorder. Transfer Products. File Management. More Products. Quick Navigation Detailed Guide 1. Backup before installing Windows 10 Try a professional free data backup software to back up computer data Full steps 2. Full steps 3. Full steps 4. Full steps. Was This Page Helpful? Read full bio. Free Download. Install Windows on Multiple Computers at Once? No Problem!

 
 

Leave a Reply

Your email address will not be published. Required fields are marked *